Hand Scraped Flooring: Points to Keep in Mind

The demand for hand-scraped flooring is growing. Yet, this type of flooring, in terms of appearance, isn't like any other. If you are one of the many considering it for your home, what points do you need to keep in mind as you look for the right type of hand-scraped hardwood?

First, nearly all species – domestic and exotic – are available as this distressed variety. Species from white oak to Brazilian cherry are all available with this distressed and rustic look. And, any floor of a building can have hand-scraped flooring, as both solid and engineered types are distressed. As you look at different types of hand-scraped flooring, think about where you will be installing it into your home, and plan accordingly with the right type of solid or engineered hardwood.

What's most notable about hand-scraped hardwood is its creation. All planks are distressed by hand, and as a result, no two appear similar. Multiple methods are used for distressing hardwood, including the following techniques for aging, scraping, or finishing.

Aged hardwood goes by one of two names: Time Worn Aged or Antique. Both are similar, but a lower grade is used for Antique flooring. In addition to being aged, the hardwood's distressed appearance is accented further through darker staining, highlighting the grain, or contouring.

Scraping techniques alter the texture of the hardwood, making an otherwise smooth surface rough. Wire Brushed is a term used to indicate hand-scraped flooring with removed sapwood and accented grain. Hand-sculpted, on the other hand, still has texture but is smoother than other varieties. Hardwood that is Hand Hewn and Rough Sawn has the roughest texture for hand-scraped flooring, with even saw marks visible.

Flooring that uses finish to give hardwood an aged texture is usually sold as French Bleed. Such hand-scraped flooring has deeper beveled edges, and the joints of the floor are highlighted with darker stain. Also a somewhat superficial type of hand-scraped flooring is pegged. Considered to be decorative only, pegged flooring must not be fastened directly onto a subfloor.

If you want an even less uniform appearance for your floor, consider having it custom distressed. In this case, after the unfinished hardwood is installed, a professional comes in to alter it through beating with chains, pickeling, fastening with antique nails, or bleaching. After, a finish is applied.

Also as you look at hand-scraped hardwood, think about your flooring long term. Will you want a distressed appearance a decade or more down the line? If not, plan ahead by going with flooring that can be sanded down: solid hardwood or an engineered variety with a thicker wear layer.

If, on the other hand, you plan to keep the hand-scraped flooring, think about how you will refinish it years down the line. Ideally, to keep up the distressed look without diminishing it through sanding, you will need a floor abrader to remove only the finish, or be prepared to have a professional refinish your floors.

Source:http://www.articlesbase.com/home-improvement-articles/hand-scraped-flooring-points-to-keep-in-mind-5435851.html

Web Data Scraping Services At Lowest Rate For Business Directory

We are the world's most trusted provider directory, your business data scrape, and scrape email scraping and sending the data needed. We scour the entire directory database or doctors, lawyers, brokers, financial advisers, etc. As the scraping of a particular industry category wise database scraping or data that can be adapted.

We are pioneers in the worldwide web scraping and data services. We must understand the value of our customer database, we email id with the greatest effort to collect data. We are lawyers, doctors, brokers, realtors, schools, students, universities, IT managers, pubs, bars, nightclubs, dance clubs, financial advisers, liquor stores, Face book, Twitter, pharmaceutical companies, mortgage broker scraped data, accounting firms, car dealers , artists, shop health and job portals.

Our business database development services to try and get real quality at the lowest possible industry. Example worked. We have a quick turnaround time can be a business mailing database. Our business database development services to try and get real quality at the lowest possible industry. Example worked. We have a quick turnaround time can be a business mailing database.

We are the world's most trusted provider directory, your business data scrape, and scrape email scraping and sending the data needed. We scour the entire directory database or doctors, lawyers, brokers, financial advisers, etc., as the scraping of a particular industry category wise database scraping or data that can be adapted.

We are pioneers in the worldwide web scraping and data services. We must understand the value of our customer database, we email id with the greatest effort to collect data. We are lawyers, doctors, brokers, realtors, schools, students, universities, IT managers, pubs, bars, nightclubs, dance clubs, financial advisers, liquor stores, Face book, Twitter, pharmaceutical companies, mortgage broker scraped data, accounting firms, car dealers , artists, shop health and job portals.

What a great resource for specific information or content with little success to gather and have tried to organize themselves in a folder? You no longer need to worry, and data processing services through our website search are the best solution for your problem.

We currently have an "information explosion" phase of the walk, where there is so much information and content information for an event or a small group of channels.

Order without the benefit of you and your customers a little truth to that information. You use information and material is easy to organize in a way that is needed. Something other than a small business guide, simply create a separate folder in less than an hour.

Our technology-specific Web database for you to a similar configuration and database development to use. In addition, we finished our services can help you through the data to identify the sources of information for web pages to follow. This is a cost effective way to create a database.

We offer directory database, company name, address, the state, country, phone, email and website URL to take. In recent projects we have completed. We have a quick turnaround time can be a business mailing database. Our business database development services to try and get real quality at the lowest possible industry.

Source:http://www.articlesbase.com/outsourcing-articles/web-data-scraping-services-at-lowest-rate-for-business-directory-5757029.html

Scraping By

In his classic 1976 Chesapeake portrait, Beautiful Swimmers, William Warner described the scrape boat as "a workboat unlike any other I had ever seen on the Bay." Seeming half as wide as it was long, he said, it looked like a "a miniature battleship." There's a reason for that, of course. It's a classic case of form following function; the boat evolved for one purpose, to ply the Bay's grassy shallows for shedding blue crabs.

Said to "float on a heavy dew," scrape boats run from 26 to 30 feet long and 9 to 10 feet wide. The hull is a shallow-V deadrise that quickly flattens toward the stern, enabling the boat to pull its twin scrapes—rectangular steel frames, each with a trailing mesh bag—in knee-deep waters. The broad beam might sound ungainly, but the hull tapers toward the stern—betraying its sailboat origins. And it has a graceful sheer, flowing from a bow height of a few feet to little more than a foot above the water amidships.

And you want a low freeboard when you spend the whole day hoisting aboard scrapes, which weigh 50 pounds apiece, not including the load of sea grass and crabs that come in too. Low sides or not, there's a higher than average inci-dence of back problems among scrape boat crabbers. They spend long days bending in precisely the position back doctors say puts undue pressure on the lower back as they sort through rolls of grasses to pluck out the peelers and softies. And that alone may be why crab potting is now the far more common way of catching soft crabs.

Some people think that's good, assuming that dragging a scrape across the Bay's beleaguered grass flats must be destructive. But the smooth bar of the scrape, unlike a toothed dredge, doesn't uproot grasses. In fact, where scraping is traditional, the grass beds seem relatively resilient. I've often thought if Maryland and Virginia had stuck with scraping as the major legal way to soft-crab, overfishing might not have become a problem. Pots can be deployed everywhere and by the thousands, whereas scraping is limited to grass beds and to ground covered at three miles per hour; and even the sturdiest waterman can only pull two of them by hand. But peeler pots seem here to stay, and other soft crabbers have taken to using a single, large scrape operated from larger workboats by hydraulic power.

The bottom line is that these lovely, superbly functional expressions of Chesapeake crabbing culture now number only in the dozens, if you count working, wooden models. There are some fiberglass scrape boat hulls in service, and a Carolina skiff or two has been adapted for the task. They are functional, but have little art to them.

It is probably a sign of how fast scrape boats are going that the Smithsonian Institution recently took the lines off Darlene, a scraper worked by Morris Marsh of Smith Island, for its archives. You can see photos of scrape boats, and learn more about the 140-year old history of scraping, from Paula Johnson's fine book, The Workboats of Smith Island. Mr. Marsh, still going strong in his late 60s, is the scraper who took Warner out nearly 40 years ago when he was researching Beautiful Swimmers.

Indeed, scraping seems to win over those who master it. Marsh's father-in-law, Ed Harrison, scraped for almost 70 years, nearly wearing through the cross-planked bottom of his boat—from the inside—with decades of walking the planks, tending his scrapes. And an islander who scrapes with Marsh today, David Laird, says he is 71—one year younger than Scotty Boy, the scrape boat he took over from his dad in 1958. "I wouldn't even know how to crab in another boat," Laird says.

Soft crabs may well be caught—or farmed—a century from now on the Chesapeake; but no one will devise a way to take them so intimately and beautifully from the shallowest marsh edges and tiniest crevices in the shore as the scrapers do.

Source:http://www.articlesbase.com/culture-articles/scraping-by-1560919.html

Choose Mining Wear Parts Wisely

It is important to choose a reputable supplier of mining wear parts; one that has been acknowledged as a leader in mining expertise. You will want to research and seek out a company that specializes in the engineering, manufacturing, procurement and design of mining wear parts and who has access to a multitude of patterns and templates to choose from.

It is vital to find a company that invites you to put them to the test; a company that is committed to selling more than just a product, standing behind the parts that they design and manufacture with an unprecedented industry guarantee. Some companies are so confident in their products that each wear part is stamped with their logo, identifying it as a superior product.

You will also want to find a company that takes pride in establishing strong customer relationships and who employs people who are as equally committed to providing outstanding service with customer satisfaction a priority. Your research will help you find a mining wear parts company that guarantees that if they do not have the part available, that they will find it for you or are capable of custom designing products to your exact specifications.

If you stop to consider the ramifications of an equipment malfunction or breakdown on production quotas, the significance of reliable parts becomes readily apparent. The impact can be far reaching if it halts production while the necessary repairs are completed. The ugly reality is that downtime incurs financial losses.

While the cost of aftermarket replacement mining wear parts is one factor, the installation of the part is equally as important. It is vital that aftermarket parts are built to a rugged standard to endure the rigorous industrial demands placed on them. Mining wear parts are routinely subjected to high stress abrasion and impact. The fabricated parts need to have the structural strength to be wear resistant with extended usage. Hardened manganese is the preferred material of choice to impart added strength and avoid premature breakage and replacement. Using inferior quality parts may result in the necessity of replacing them prematurely if they do not withstand the wear and tear that they are subjected to daily. While a few dollars may be saved initially by purchasing inferior mining wear parts, production costs can dramatically increase if frequent breakdowns occur and manpower hours are wasted in the field. Efficient use of manpower is an important budget consideration. Reliability is an absolute necessity w
hen you have production deadlines to meet and operations can quickly grind to a standstill when production is halted.

Quality assurance management monitors the consistency of the parts, demanding that they are machined within precise measurements. In addition, they focus on striving to improve the quality of parts as new technology becomes available. Using precision made, high quality wear parts can make your business more competitive, giving you an advantage and improving your bottom line.

Source:http://ezinearticles.com/?Choose-Mining-Wear-Parts-Wisely&id=6691631

Scraping table from html web with CloudStat

You need to use the data from internet, but don’t type, you can just extract or scrape them if you know the web URL.

Thanks to XML package from R. It provides amazing readHTMLtable() function.

For a study case,

I want to scrape data:

    US Airline Customer Score.
    World Top Chess Players (Men).

A. Scraping US Airline Customer Score table from

http://www.theacsi.org/index.php?option=com_content&view=article&id=147&catid=&Itemid=212&i=Airlines

Code:

airline = ‘http://www.theacsi.org/index.php?option=com_content&view=article&id=147&catid=&Itemid=212&i=Airlines’

airline.table = readHTMLTable(airline, header=T, which=1,stringsAsFactors=F)

Result:

B. Scraping World Top Chess players (Men) table from http://ratings.fide.com/top.phtml?list=men

Code:

chess = ‘http://ratings.fide.com/top.phtml?list=men’

chess.table = readHTMLTable(chess, header=T, which=5,stringsAsFactors=F)

Result:

Done. You had successfully scraping data from any web page with CloudStat.

You can get the full version of this study case (code and result) at Scraping table from html web.

Then, you can analyze as usual! Great! No more retype the data. Enjoy!

Source:http://www.r-bloggers.com/scraping-table-from-html-web-with-cloudstat/

Extractions and Skin Care

As an esthetician or skin care professional, you may have heard some controversy over the matter of performing extractions during a routine facial service. What may seem like a relatively simple procedure can actually raise great controversy in the world of esthetics. Some estheticians regard extractions as a matter of providing a complete service while others see this as inflicting trauma to the skin. Learning more about both sides of the issue can help you as a professional in making an informed decision and explaining the issue to your clients.

What is an extraction?

As a basic review, an extraction is removing impurity (plug of dead skin or oil) from a pore or pimple. It is the removal of both blackheads and whiteheads from the skin. Extractions occur after the skin has been thoroughly cleansed, exfoliated and sometimes steamed to soften the area prior to extraction.

Why Do It?

Extractions are considered a "must" by many estheticians when performing a routine facial because they want to leave their clients skin looking and feeling it's best. When done correctly, a simple extraction should be quick and relatively painless. As a trained esthetician it is important to know if your client has sensitive skin which would make them more prone to the damage that can be caused by extractions.

Why Not?

Extractions should only be performed by a trained esthetician and should not be done in excess. Extractions can cause broken capillaries or sin irritations that can lead to more (not less) breakouts. Extractions can also cause discomfort for your client when done incorrectly so you should seek their permission before performing any type of extraction during their facial. Remember your client has the right to know any product or procedure being performed on their skin and make an informed choice.

Who Decides?

As an esthetician it may be entirely up to you or it may be a procedure within your salon to do or not do extractions. It is important to check the guidelines of your employer and know their policies before performing any procedure. Remember to explain extractions and their benefits and possible complications to your client. Trust is an important part of any relationship and your client needs to know you are being open and honest with them. The last thing you want as a professional is a reputation for inflicting unnecessary and unwanted procedures or damage to your client's skin.

Bellanina Institute's owner and director, Nina Howard, is a multi-talented, forward-thinking entrepreneur who has built the Bellanina brand form the ground up to a successful million-dollar spa, spa training business, and skin care product line. Nina is a Licensed Esthetician with Para-Medical studies, Massage Therapist, Polarity Therapist, Skin Care Educator, Artist, and Professional Interior Designer.

Source:http://ezinearticles.com/?Extractions-and-Skin-Care&id=5271715

Online Data Entry and Data Mining Services

Data entry job involves transcribing a particular type of data into some other form. It can be either online or offline. The input data may include printed documents like Application forms, survey forms, registration forms, handwritten documents etc.

Data entry process is an inevitable part of the job to any organization. One way or other each organization demands data entry. Data entry skills vary depends upon the nature of the job requirement, in some cases data to be entered from a hard copy formats and in some other cases data to be entered directly into a web portal. Online data entry job generally requires the data to be entered in to any online data base.

For a super market, data associate might be required to enter the goods which have sold in a particular day and the new goods received in a particular day to maintain the stock well in order. Also, by doing this the concerned authorities will get an idea about the sale particulars of each commodity as they requires. In another example, an office the account executive might be required to input the day to day expenses in to the online accounting database in order to keep the account well in order.

The aim of the data mining process is to collect the information from reliable online sources as per the requirement of the customer and convert it to a structured format for the further use. The major source of data mining is any of the internet search engine like Google, Yahoo, Bing, AOL, MSN etc. Many search engines such as Google and Bing provide customized results based on the user's activity history. Based on our keyword search, the search engine lists the details of the websites from where we can gather the details as per our requirement.

Collect the data from the online sources such as Company Name, Contact Person, Profile of the Company, Contact Phone Number of Email ID Etc. are doing for the marketing activities. Once the data is gathered from the online sources into a structured format, the marketing authorities will start their marketing promotions by calling or emailing the concerned persons, which may result to create a new customer. So basically data mining is playing a vital role in today's business expansions. By outsourcing the data entry and its related works, you can save the cost that would be incurred in setting up the necessary infrastructure and employee cost.

Source:http://ezinearticles.com/?Online-Data-Entry-and-Data-Mining-Services&id=7713395

Git workflow for Scrapy projects

Our customers often ask us what’s the best workflow for working with Scrapy projects. A popular approach we have seen and used in the past is to split the spiders folder (typically project/spiders) into two folders: project/spiders_prod and project/spiders_dev, and use the SPIDER_MODULES setting to control which spiders are loaded on each environment. This works reasonably well, until you have to make changes to common code used by many spiders (ie. code outside the spiders folder), for example common base spiders.

Nowadays, DVCS (in particular, git) have become more popular and people are quite used to branching, so we recommend using a simple git workflow (similar to GitHub flow) where you branch for every change you make. You keep all changes in a branch while they’re being tested and finally merge to master when they’re finished. This means that master branch is always stable and contains only “production-ready” spiders.

If you are using our Scrapy Cloud platform, you can have 2 projects (myproject-dev, myproject-prod) and use myproject-dev to test the changes in your branch.  scrapy deploy in Scrapy 0.17 now adds the branch name to the version name (when using version=GIT or version=HG), so you can see which branch you are going to run directly on the panel. This is particularly useful with large teams working on a single Scrapy project, to avoid stepping into each other when making changes to common code.

Here is a concrete example to illustrate how this workflow works:y

•    the developer decides to work on issue 123 (could be a new spider or fixes to an existing spider)
•    the developer creates a new branch to work on the issue
•    git checkout -b issue123
•    the developer finishes working on the code and deploys to the panel (this assumes scrapy.cfg is configured with a deploy target, and using version=GIT – see here for more information)
•    scrapy deploy dev
•    the developer goes into the panel and runs the spider, where he’ll see the branch name (issue123) that will be run
•    the developer checks the scraped data looks fine through the item browser in the panel
•    whenever issues are found, the developer makes more fixes (always working on the same branch) and deploys new versions
•    once all issues are fixed, the developer merges the branch and deploys to production project
•    git checkout master
•    git merge issue123
•    git pull # make sure to pull latest code before deploying
•    scrapy deploy prod

We recommend you keep your common spiders well-tested and use Spider Contracts extensively to test your final spiders. Otherwise experience tell us that base spiders end up being copied (instead of reused) out of fear of breaking old spiders that depend on them, thus turning their maintenance into a nightmare.

Source:http://blog.scrapinghub.com/2013/03/06/git-workflow-scrapy-projects/

Scrape it – Save it – Get it

I imagine I’m talking to a load of developers. Which is odd seeing as I’m not a developer. In fact, I decided to lose my coding virginity by riding the ScraperWiki digger! I’m a journalist interested in data as a beat so all I need to do is scrape. All my programming will be done on ScraperWiki, as such this is the only coding home I know. So if you’re new to ScraperWiki and want to make the site a scraping home-away-from-home, here are the basics for scraping, saving and downloading your data:

With these three simple steps you can take advantage of what ScraperWiki has to offer – writing, running and debugging code in an easy to use editor; collaborative coding with chat and user viewing functions; a dashboard with all your scrapers in one place; examples, cheat sheets and documentation; a huge range of libraries at your disposal; a datastore with API callback; and email alerts to let you know when your scrapers break.

So give it a go and let us know what you think!

Source:https://blog.scraperwiki.com/2011/04/scrape-it-save-it-get-it/

Content Scraping Reuses Blog Posts without Permission

What do popular blogs and websites such as Social Media Examiner, Copy Blogger, CNN.com, Mashable, and Type A Parent have in common? No, it’s not traffic and a loyal online community, each was a victim of the content scraping site “BuzzMyFx.” Although most bloggers fall victim to content scrapers at least once, the offending website was such an extreme case the backlash against it was fast and furious. Thanks to the quick action of many angry bloggers, BuzzMyFix was taken down in a matter of days.

If you’re not familiar with content scraping sites and aren’t sure why they’re bad and what you can do if you fall prey, read on. Not knowing what steps you can take to remove your content from a scraping site can mean someone else is profiting from your hard work.

What is content scraping?

Content scraping is when a blog or website pulls in other bloggers’ content without permission, in many cases passing it off as their own. Instead of stocking their sites with unique content, they steal entire blog posts. Some do leave the original authors’ bylines, but there are plenty that don’t provide attribution at all. This is not a good thing at all.

If you don’t care about someone taking your content and putting it on their blogs and websites without your permission, you should. These sites are stealing traffic, search engine rankings, and even advertising revenue from bloggers. Moreover, by ignoring scraping sites you’re giving the message that this practice is OK.

It’s not OK.

How was BuzzMyFx different?

BuzzMyFx was a little different from your usual scrapers. Bloggers didn’t just find their content had been posted on this site, they learned their entire blogs — down to the design and comments — had been cloned. Plus, any bloggers checking to see if their blogs were being cloned immediately found themselves being scraped as well. Dozens, if not hundreds of blogs were affected. However, bloggers didn’t take this incident sitting down. They spread the word and contacted the site’s host en masse. Thanks to their swift action, and the high number of complaints, the site was removed quickly.

How can I tell if my content is being scraped?

Fortunately for content creators, scrapers are a lazy bunch. Because their sites are automated, and they don’t check or read the content being pulled, they don’t take many precautions to ensure the people they scrape from don’t find their sites. In fact, they may not even care. Fortunately, this makes it easy to learn if your content is being stolen.

    Link to your own articles — When you write a blog post and link to other (of your own) blog posts within that post, it’s not only good SEO. You also will get pingbacks whenever someone else steals your content because of your interlinks. You’re alerted when someone links to your content, and when content is published with your links, you’ll get that alert.

    Google Alerts — If your name, blog’s name, or other unique keywords are set up as Google Alerts, you’ll receive an e-mail every time content is published with these keywords.

    Analytics — When people click on your links that are in scraped content, it will show up as referring traffic in your analytics program. You should always check referring traffic so you can thank the referring site owner, but also to make sure no one is stealing your content.

What steps can I take to remove my content from a scraper?

If you find your content is being stolen, know you have several options. First, you’ll need to find out who owns the scraping site. You can find this out by doing a WHOis domain lookup, which will enable you to search for the website’s details, including the name of the webmaster, contact info, and the name of the site’s host.

Keep in mind that sometimes the website’s owner will pay extra to have his or her name kept private, but you will always be able to find the name of the host. Once you have this information, you can take the necessary steps to have your content removed.

    Contact the site’s owner personally: Your first step should always be a polite request to remove your content immediately. Let the website owner know he or she is in violation of the Digital Millennium Copyright Act (DMCA), and you will take the necessary steps to report him if he doesn’t comply.

    Contact the site’s host: If you can’t find the name of the person who owns the site, or if he won’t comply with your takedown request, contact the website’s host. You’ll have to prove your content is being stolen. As the host can be held liable for allowing the content theft, it’s in their best interest to contact the website owner and request removal.

    Contact Google: You can contact Google and fill out a form to have them remove the website from their search engines.

    Spread the word: Let all your blogging friends know about content scrapers when you come across them. The more people who take action against content scrapers, the less likely they are to do it again.

Contacting the webmaster with a takedown notice doesn’t have to be an intimidating process, either. The website Plagiarism Today has a wonderful set of stock letters to use to contact webmasters, web hosts, and even Google. All you have to do is insert the necessary information.

Content scrapers and cloners may try to steal your content, but you don’t have to let them. Stand up for what’s yours.

Source: http://www.dummies.com/how-to/content/content-scraping-reuses-blog-posts-without-permiss.html

Web scraping tutorial

There are three ways to access a website data. One is through a browser, the other is using a API (if the site provides one) and the last by parsing the web pages through code. The last one also known as Web Scraping is a technique of extracting information from websites using specially coded programs.

In this post we will take a quick look at writing a simple scraperusing the simplehtmldom library. But before we continue a word of caution:

Writing screen scrapers and spiders that consume large amounts of bandwidth, guess passwords, grab information from a site and use it somewhere else may well be a violation of someone’s rights and will eventually land you in trouble. Before writing  a screen scraper first see if the website offers an RSS feed or an API for the data you are looking. If not and you have to use a scraper, first check the websites policies regarding automated tools before proceeding.

Now that we have got all the legalities out of the way, lets start with the examples.

1. Installing simplehtmldom.
Simplehtmldom is a PHP library that facilitates the process of creating web scrapers. It is a HTML DOM parser written in PHP5 that let you manipulate HTML in a quick and easy way. It is a wonderful library that does away with the messy details of regular expressions and uses CSS selector style DOM access like those found in jQuery.

First download the library from sourceforge.  Unzip the library in you PHP includes directory or a directory where you will be testing the code.

Writing our first scraper.

Now that we are ready with the tools, lets write our first web scraper. For our initial idea let us see how to grab the sponsored links section from a google search page.

There are three ways to access a website data. One is through a browser, the other is using a API (if the site provides one) and the last by parsing the web pages through code. The last one also known as Web Scraping is a technique of extracting information from websites using specially coded programs.

In this post we will take a quick look at writing a simple scraperusing the simplehtmldom library. But before we continue a word of caution:

Writing screen scrapers and spiders that consume large amounts of bandwidth, guess passwords, grab information from a site and use it somewhere else may well be a violation of someone’s rights and will eventually land you in trouble. Before writing  a screen scraper first see if the website offers an RSS feed or an API for the data you are looking. If not and you have to use a scraper, first check the websites policies regarding automated tools before proceeding.

Source: http://www.codediesel.com/php/web-scraping-in-php-tutorial/

What you have to know before requesting web scraping services?

Before you request web scraping services you have to know what are your needs (what data you need, structure of it and where you can find this data).

Step 1: Define what data you need?

Data needs depending on purpose, if you want to find new customers you probably need contact data from players in your industry. Also if you want to study your competitors you need to define who are they. Only after that you can select data sources (websites feeds or other electronic sources) for this extraction.

In many cases for discovering and defining data sources are used search engines like Google, Bing, Yahoo, and others.

Step 2: Structure of data

Data structure it’s directly linked to usage purpose. In many cases data structure it’s a table where a row represents an entity and a cell of this row represents a property of this entity. In other cases Data structure is a a chart or another graphic representation builder with data extracted from a web source.

Step 3: Number of data extraction

In many cases is needed one time data extraction. In other cases when you need a regular report, are needed periodically extractions.

If you have defined all of above points you are ready to request a quote and an amount estimation from this contact form.

Source: http://thewebminer.com/blog/2013/08/